top of page
AxelTech Oxygen 1000 iso
The AxelTech Oxygen 1000 is a fully Digital Broadcast Console designed for On Air and Production in any Radio Station: a compact 6 faders unit, with a powerful internal audio routing and a wide range of controls and I/O in a rugged and classy steel chassis.
 
The Oxygen 1000 DSP based audio processing delivers high-end quality and guarantees latest features and flexibility.
 
Reliable and easy to use as an analogue mixing console the Oxygen 1000 offers top class features: Low Latency, Users Preset, Smart Keys, EQ, Compressors, Telephone Hybrid, HDMI Output, Analogue and Digital I/O, USB, Bluetooth, Dante AoIP, Telco, Presenter Talk Box.Oxygen 1000 can be remotely controlled through a dedicated application.
 
Input & Output
 
  • 3 microphone inputs
  • 4 stereo analogue inputs
  • 4 stereo analogue outputs
  • 1 built-in telephone hybrid,
  • 1+4 telco interface with GPIO
  • Bluetooth audio interface 
  • 1 digital Out (AES/EBU)
  • 2 USB audio interfaces (disabled with Dante option installed)
  • 8 stereo inputs + 8 stereo outputs via Dante (optional)
 
General
 
  • Fully Digital Broadcast Console for Radio Broadcasting with 6 faders
  • A/B Fast source switch buttons for each fader
  • 4+1 busses (PGM, SUB, Aux1, Aux2, PFL)
  • Near 0 latency (< 0,7 ms I/O)
  • Digital Signals Routing via the 48×48 internal matrix
  • Complete Remote Control by means of an application replicating the surface
  • Remote configuration and maintenance via Web Interface
  • User-definable Presets & Snapshot
  • 5 bands fully parametric Equalizer on every input
  • Dynamic Processor with expander and compressor section on each microphone inputs
  • Advanced and configurable Monitor Facilities for Control Room and Studio
  • Customizable RGB colored buttons
  • High Resolution (120 leds) meter bars for outputs
  • HDMI Out for console status display
  • 2 Timers (Ctrl-Room and Studio microphones timers on HDMI Monitor)
 
Versions
 
  • Oxygen 1000 
  • Oxygen 1000 – Bluetooth

AxelTech Oxygen 1000

£2,802.00Price

  • Microphone Inputs

    • 3 Microphone Inputs
    • Mic 1 on XLR, Mic 2 & 3 on RJ45: 2-3, all balanced with + 48V Phantom and GPIO
    • Independent ON AIR Lights and Cut Off control, when opening Control Room and Studio microphones
    • PFL button switches to private conversation on Hybrid/Telco/Bluetooth mode
    • Enable TalkBack feature on any Studio or Control Room microphone
    • Parametric Compressors/Expander (drive, threshold, attack time, release time) for MICROPHONE and MONO inputs
    • Save and recall microphone presets including Compressor/Expander settings
    • Phase inversion on microphone inputs
    • MONO inputs assignable as EXT source
    • Ducking / AutoFader assignable to all sources (automatic attenuation of music on speech)

    Analogue inputs

    • Line Stereo Inputs: 4
    • Balanced on XLR for Line 1, Balanced on RJ45 for Line 2-4
    • Channel mode selection: STEREO, MONO, L, R, INV-L, INV-R, INV
    • Stereo-1 & DANTE-1 inputs can be configured as 4 Telco Inputs

    USB audio I/O

    • 2 Built-in stereo USB (Type-B) I/O Audio Interfaces allow to directly connect the PC to the Oxygen 1000 console, with no need for audio cards
    • The PC detects each of the console USB as a digital audio card with 1 stereo inputs and 1 stereo outputs for simultaneous playout and recording

    Analogue outputs

    4 Balanced Outputs:

    • OUT-1 – XLR – Fixed as PGM
    • OUT-2 – XLR – by default assigned as SUB
    • OUT-3 – RJ45 – by default assigned as AUX-1
    • OUT-4 – RJ45 – by default assigned as AUX-2
    • OUT-2 stereo output can be configured as N-1 to achieve up to 2 mono additional Telco
    • OUT-1 & OUT-2 outputs are both equipped with a GPO

    Digital output

    1 AES/EBU output on XLR

    Headphones and local monitor outputs

    • OUT-2-4 outputs: can be configured as Studio Presenter and Studio Guest Headphones
    • Unbalanced outputs: 2 Line out on Jack 6.3 for Control Room Headphones
    • Adjustable maximum Control Room and Studio speakers volume (Studio Speaker only via SW)
    • Adjustable maximum Control Room and Studio headphones volume (Studio Headphones only via SW)
    • Adjustable CUT or Attenuation mode (-40, -30, -20, -10 dB) on Control Room and Studio speakers
    • Independent source selection (PGM, SUB, AUX1, AUX2, EXT) for control room and studio speakers, control room and studio headphones with or without PFL
    • Independent Talk Back management on Control Room and Studio speakers
    • Independent Talk Back management on Control Room, Studio headphones
    • Same source selection for Control Room and Studio headphones, with independent level

    GPI/GPO

    GPI: 9 in total, for Talk back, Telephone Hybrid or other features
    GPO: 9 total, to control OnAir lamps or provide HOOK and RING commands for external telephone Hybrid
    User custom GPIs (e.g. Ring, Talkback, channel ON/OFF, etc.)
    User custom GPOs (e.g. Hook/ONAIR, Studio-Light, Control Room-Light)

    Surface & Management

    • Automatic firmware update via Internet
    • WEB UI for Console configuration and service features (Save, restore, update, logs, etc.)
    • Save and recall EQ presets (up to 10)
    • New real-time EQ algorithm with graphic
    • Fast and accurate Led Meters display
    • Save and recall control panel configuration with 10 Snapshots
    • Save and recall total console configuration. The configuration can be saved to internal memory (microSD), USB and PC (via WEB interface)
    • Gain adjustment knobs with adaptive speed
    • Dimmable buttons light
    • Adjustable fader ON/OFF threshold (from -50 dB to 0 dB)

    Telephone Hybrid and Telco

    The built-in telephone hybrid allows direct connection of a telephone line POTS/PSTN on RJ-11C. The audio is processed via DSP that delivers a state-of-the-art audio processing. It’s also available a Telco N-1 in/out, to connect Oxygen 1000 to an external telephone hybrid. The Telco N-1 is always available on RJ45. TLC commands are available on the same RJ45 with Hook and Ring interface.

    TLC commands for Telco-2-5 are available and configurable on GPIO-DB9 connector with Hook and Ring.

    HDMI output

    The HDMI output allows to connect an HD display monitor to the console, suitable to be used in two flavours:

    Monitor, that displays the following information:

    • Audio input source levels
    • 4+1 BUS output levels
    • A/B source names assigned of 10 channels
    • Display On-Air sources
    • Microphone On timer (control room & studio)
    • Large Clock
    • Audio output level (Loudspeakers & Headphones)
    • On-Air microphone
    • Telephone active

    Configure, for configuring all of the device features.

    • HDMI output combined with 4 rotary knobs allow the fast and intuitive programming of all the mixer parameters.
    • The programming GUI has been designed in order to be very easy and intuitive.
    • Selectable home page layouts are available, with many theme icons.

    HDMI output can be personalized with the customer logo. Selectable display layouts are available.

  • AxelTech Oxygen 1000 
    AxelTech Oxygen RJ45 adapters Mic (each)
    AxelTech Oxygen RJ45 adapters Line In (each)
    AxelTech Oxygen RJ45 adapters Line Out (each)
    AxelTech Oxygen RJ45 adapters Telco (each)
    AxelTech Oxygen RJ45 adapters Complete Set

bottom of page